WebCalculate (a) the activation energy; and (b) the constant D0. Solution: 6 × 10−15 D0 exp [−Q/ (1.987)/ (1000)] = 1× 10−9 D0 exp [−Q/ (1.987)/ (1673)] 6 × 10–6 = exp [–Q (0.00050327 – 0.00030082)] = exp [–0.00020245 Q] –12.0238 = −0.00020245 Q or Q = 59,390 cal/mol 1 × 10–9 = D0 exp [–59,390/ (1.987)/ (1673)] D0 = 0.057 cm 2 /s WebDetermine the carburizing time (in s) necessary to achieve a carbon concentration of 0.44wt% at a position 1.4 mm into an iron-carbon alloy that initially contains 0.031wt%C. The surface concentration is to be maintained at 1.2wt%C, and the treatment is to be conducted at 1280∘C. Assume that D0 = 5.1 ×10−5 m2/s and Qd = 154 kJ/mol.
Materials Science and Engineering: An Introduction
WebDetermine the carburizing time necessary to achieve a carbon concentration of 0.30 wt% at a position 4 mm into an iron-carbon alloy that initially contains 0.10 wt% C. The surface concentration is to be maintained at 0.90 wt% C, and the treatment is to be conducted at 1100{eq}^{\circ} {/eq}C. Use the diffusion data for {eq}\gamma {/eq}-Fe. WebMay 28, 2016 · 6.15 For a steel alloy it has been determined that a carburizing heat treatment of 10-h duration will raisethe carbon concentration to 0.45 wt% at a point 2.5 mm from the surface. Estimate the time necessary to achievethe same concentration at a 5.0-mm position for an identical steel and at the same carburizing temperature. how to say great aunt in spanish
Materials Science and Engineering: An Introduction - Numerade
WebDetermine the carburizing time necessary to achieve a carbon concentration of 0.45 wt% at a position 2 mm into an iron-carbon alloy that initially contains 0.20 wt% C. The surface concentration is to be maintained at 1.30 wt% C, and the treatment is to be conducted at 1000 °C. Use the diffusion data for y-Fe. 13. WebDetermine the carburizing time necessary to achieve a carbon concentration of 0.45 w t % at a position 2 m m into an iron-carbon alloy that initially contains 0.20 w t % C. The surface concentration is to be maintained at 1.30 w t % C, and the treatment is to be conducted at 1000 ∘ C. Use the diffusion data for γ -Fe in Table 5.2. Check back soon! WebDetermine the carburizing time necessary to achieve a carbon concentration of 0.45 wt% at a position 2-mm into a steel alloy that initially contains 0.20 wt% carbon.The surface concentration is to be maintained at 1.30 wt% at 1000℃.Use table 5-4 for error function values as needed. Expert Solution Want to see the full answer? north haven ct gis map